MUTOH Rockhopper II Series Specifikace stáhnout pdf (Strana 108)

100

101

Rockhopper II series printers – Maintenance Manual

109

AP-74065, Rev. 1.2, 27/09/04

1 = CR cursor assembly 2 = E ring fixing the cursor roller assembly.

Step 4 : Replace the cursor roller assembly.

Step 5 : Install the spacers and the other parts as shown in the following figure.

1 = E ring fixing the side cursor roller assy 2 = High-load bearing of the side cursor roller assy

3 = Brass spacer of the side cursor roller assy 4 = E ring of the cursor roller assy

5 = High-load bearing of the cursor roller assy of downside 6 = Brass spacer of the cursor roller assy

Step 6 : Apply the screw lock to the cursor axis, and install the cursor roller assembly with the axis at the

lower position.

Notes :

¾ Be sure that the screw lock does not contaminate the cursor roller or the spacer.

1 = Applying position of the screw lock

Step 7 : Perform head height adjustment according to "Head height adjustment".

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 318 319

Komentáře k této Příručce

Žádné komentáře

MUTOH Rockhopper II Series Specifikace Strana 108

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování MUTOH Rockhopper II Series